Kingston A400 Clone Software: Top 2 Choices and Tutorials

Why Clone Your Kingston A400 SSD?

Cloning your Kingston A400 SSD can be beneficial for several reasons:

✅Upgrade to a Larger/Faster SSD

The Kingston A400 is a budget SATA SSD with decent speeds (~500MB/s read/write). If you're upgrading to a faster NVMe SSD (like Kingston KC3000) or a higher-capacity SSD, cloning avoids reinstalling Windows and apps.

✅Replace a Failing Drive

SSDs wear out over time (measured in TBW - Terabytes Written). If your A400 is showing errors (slow speeds, crashes, SMART warnings), cloning preserves your data before failure.

✅Backup Before Resetting/Repairing

If you need to troubleshoot Windows, cloning ensures a full backup before risky operations.

Best 2 Kingston A400 SSD Clone Software

Choosing the right Kingston A400 clone software is crucial for a smooth and error-free migration. Below are two of the best options that offer reliability, ease of use, and advanced cloning features.

Overview of 2 Kingston A400 SSD Cloning Tools

1. AOMEI Cloner

AOMEI Cloner is one of the most user-friendly and powerful cloning solutions for Kingston A400 SSD users.

⭐Disk Clone & System Clone: Copy all partitions (system, recovery, data) in one click or transfer only OS for a clean setup.
⭐Intelligent Sector Clone: The cloning process automatically skips damaged and blank sectors, ensuring a stable and complete transfer without interruptions.
⭐SSD Alignment: Maximize your Kingston A400 SSD’s speed and longevity with automatic 4K sector alignment.
⭐Partition Resizing: Adjust partitions during cloning for flexible storage management.

Download AOMEI Cloner on your computer now!

2. Acronis True Image for Kingston

Acronis True Image for Kingston is an official cloning tool provided by Kingston. It’s specifically designed for Kingston SSDs, making it a reliable choice for A400 users.

• Full Disk Cloning – Easily migrate all data, including OS and apps.
• Active Cloning – Clone a drive while still using your system.
• Real-Time Protection – Built-in cybersecurity features protect against ransomware and malware.

To download Acronis True Image for Kingston, you need to download and install Kingston SSD Manager first. Then run the KSM software, select the Acronis tab, and click on “Download for Windows” to download Acronis software.

How to Clone Kingston A400 SSD to Another SSD

In this part, you’ll learn how to clone Kingston A400 SSD to a new SSD via AOMEI Cloner and Acronis True Image separately. Before you start, please do the following preparations:

• Connect the new SSD to your computer and ensure it’s detected by Windows.
• If the new SSD contains any data, backup the data before proceeding. Otherwise, you’ll lose the data after cloning.

Now follow the instructions below:

Kingston A400 Clone via AOMEI Cloner

1. Install and launch AOMEI Cloner. Go to Clone and select Disk Clone.

2. Choose the Kingston A400 SSD as the source disk. Then select the new SSD as the destination.

3. Enable SSD Alignment to optimize the target SSD performance and click Start Clone.

✍ Tip: If the new SSD is larger than the old SSD, you can click Edit Partitions > Add unused space to all partitions or Manually adjust partition size to clone and resize hard drive without leaving unallocated space at the end of disk.

4. After cloning, shut down, replace the old SSD with the new one, and boot.

Kingston A400 Clone with Acronis True Image

1. Install and open Acronis True Image for Kingston. Select Tools, then click Clone Disk.

2. Select the Automatic clone method and click Next.

3. Select Kingston A400 as the source and pick the new SSD as the target.

4. Select a disk usage type according to your situation. Here I choose To replace a disk on this machine.

5. On the Summary screen, perform a final confirmation that you have selected the correct source and destination disks. Click Proceed to begin the data transfer operation.

6. After cloning, swap the SSDs and boot from the new drive.

Troubleshooting Common Cloning Issues

While cloning your Kingston A400 SSD, you may encounter issues such as cloning failures and boot errors. Below are common problems and how to fix them.

1. Cloning Process Fails or Freezes

It can be caused by insufficient disk space on the target SSD or bad sectors on the source drive.

Solutions:

✅ Check Disk Space – Ensure the target SSD has enough free space to accommodate all cloned data.

✅ Run CHKDSK – Scan for disk errors by running chkdsk C: /f /r in Command Prompt. (Replace C: with your actual source drive letter.)

2. Cloned SSD Won’t Boot

This issue may result from BIOS/UEFI mismatch, wrong boot order, or missing boot partition.

Solutions:

✅ Check Boot Mode – If your system uses UEFI, ensure the cloned SSD is formatted as GPT. If using Legacy BIOS, it should be MBR.

✅ Set SSD as Boot Drive – Enter BIOS (press F2, F12, or DEL during startup) and set the cloned SSD as the primary boot device.

✅ Use “bootrec” in Windows Recovery – Boot from a Windows installation USB and run:

• bootrec /fixmbr
• bootrec /fixboot
• bootrec /rebuildbcd

Conclusion

Cloning your Kingston A400 SSD is an effective way to upgrade storage, improve performance, or safeguard your data. With the right Kingston A400 clone software, you can easily migrate your system without losing important files.

• AOMEI Cloner is the better choice if you need flexibility, including partition cloning, advanced SSD optimization, and support for other branded SSDs (e.g.: clone WD SSD).
• Acronis True Image for Kingston is ideal if you want free cloning software for Kingston SSDs and added cybersecurity features.

Follow this guide to upgrade your computer storage now!