- Last Active
One last note, in my research i noticed there wasn't a BCD file in the boot partition of the SSD, when i had problems, maybe that will help looking for a reason/solution ?
HI, Just to clarify i booted from the HD, ran a disk backup using backupper from the HD, and then i restored that backup to the SSD (after removing the partitions). I think i have booted from the HD, and restored the original backup to the SSD, whic…
Hi, as the SSD is connected via NVMe to the motherboard, i am not able to connect the HD (SATA) to the same connection. So i used the available SATA connection. So i should be able to boot the PC using the HD (SATA), and have the SSD accessible.
As i was waiting, i did install an old HD i had laying around, and restored to that HD. Guess what, that worked perfect !!
So the problem must be with the SSD which was installed by the HP technician, and assured me that this SSD was working fi…Thanks for that, i'll give that a try, getting a bit hopelessJust checked the disk it's a SSD which will be hard to take from the motherboard.Thanks for your response, i have performed the whole restore again, but unfortunately the exact same result. It's getting late here (Australia), not sure in which time zone you are, but i can setup this disk tomorrow the way you requested. What will…Yes i can, i hope the below is what you are after;
This is what diskpart shows;
OK, decided to reboot from the Backupper bootable disk, and that seemed to have refreshed the destination disk state.
Restored the disk backup/image, but unfortunately still getting Inaccessible boot device ??
in Getting "Inaccessible Boot Device" after disk restore ? Comment by AntoniusFM April 2021Thanks for your response SIW2, but in my attempts to get this to work, i have wiped the disk, just to be sure. To my surprise the wiped disk still shows as a MBR Disk (with partitions) when i attempt to restore ?? I think there is something wrong wi…