Winpemaker for Aomei Backupper and Partition Assistant

2

Comments

  • ERROR: The system could not find the registry key or value.


    image

  • Might want to double check line 523


    You've got "reg.exe import "BIN\REG32\VC90x86.reg" >nul"


    But only a "REG86" folder exists in the BIN folder, not REG32.

  • Thanks XenonKilla. image

  • Thanks, I downloaded v8.  Have you corrected as of now the error vagn_32 and XenonKilla found in the 7PEv8.zip?  Do you have documented anywhere the change history of what you have improved?

  • Hi, have you done any further work on  the WinPEmaker for Win 7?  Is this in a finished state?

  • I am trying to build on a Windows 10 Pro, when it boots I get the following;

    A winpeshl.ini file is present, but no commands were successfully launched This could be caused by incorrect formatting or an invalid executable name.....This is my first time building this, if I go into the directory and manually execute backupper.exe it works.  From the dos prompt, it looks like everything is there, just no gui to select anything.  Thanks in advance. 

  • As a following to the above, does it make a difference that I installed the Aomei software on my D: partition???  I keep all my non Windows files on a D: partition.  Also, the winpeshl.ini file has the following;


    [LauchApps]

    "pecmd.exe EXEC !winpeutil InitializeNetwork"

  • Try


    [LaunchApps]

    pecmd.exe "EXEC !winpeutil InitializeNetwork"


  • Hello, 

    awesome solution for me. thanks man keep it up. Acrobat DC crack


  • SIW2 ,


    KeePass has possibility is to integrate?
  • edited July 2016

    New versions:

    If you have any Aomei products installed, they will be included and can be accessed from a menu.

    It is easy to use, download this file from dropbox,


    New version July 2016 for win 7/8.1/10 x86 and x64

    On onedrive

    https://1drv.ms/u/s!AkcyDjKJJ6Kwhmlzah9AtJ42xMKh

    unzip it onto your drive, so you will have

    C:\AomeipeV9 FOLDER. Then run as admin on the Run-me-as-Adminv9.cmd .



    ******************************************************************************************

    Special version for WIN 7 ONLY - NEW July 2016

    https://1drv.ms/u/s!AkcyDjKJJ6KwhjWLAtKVYwU2f8pe

    unzip it onto your drive, so you will have

    C:\new7x64upd FOLDER. Then run as admin on the 7pebuilder.cmd .


    Note: Works for x86 and x64 win7



  • SIW2,


    I could not open the Aomei Partition.


    New version July 2016 for win 7/8.1/10 x86 and x64



    image

  • Sorry for that our software cannot support to be used in another WinPE.

    You can only create the WinPE witf the software itself.

  • Previous version was usually by adding

  • And Aomei PE Builder if someone wants to download a Windows 7 only with SP1 and will work.

    It is also valid with Windows updates until the end of 2014


  • edited July 2016

    Thanks Vagn. I probably made an error in the script, will have a look.


    What language is your Windows installation?

  • Hi,

    PT BR Brazil


  • It works fine for me.


    What do you have in your registry?


    imageCapture.JPG


  • Hi,


    I did with Windows 10 and it worked, but those cited key not appear or Windows 10 and not Windows 10.


    Tell me something I can keep the "aomeipeV9" folder for future constructions of your winpe?


    image

  • I can't understand your post.


    Glad it worked with win10 image

  • Let's say tomorrow leaves the 3.6 version of Aomei if I use the folder already downloaded files etc .. will of a problem? Erasing vo to create a new iso?


    image

  • Yes, it should work with Backupper 3.6


    .aomeipev9 should be OK with any installed version of Aomei Backupper.

  • Regarding Post #41,... Sorry, I still don't understand what is the difference running on Win7x64 either of the two versions posted--both seem to state they will run on Win7--as quoted below--is there any advantage in using the Win7 only version? ...(Since both will run on Win7) :


    New versions:

    If you have any Aomei products installed, they will be included and can be accessed from a menu.

    It is easy to use, download this file from dropbox,


    New version July 2016 for win 7/8.1/10 x86 and x64

    On onedrive

    https://1drv.ms/u/s!AkcyDjKJJ6Kwhmlzah9AtJ42xMKh

    unzip it onto your drive, so you will have 

    C:\AomeipeV9 FOLDER. Then run as admin on the Run-me-as-Adminv9.cmd .



    ******************************************************************************************

    Special version for WIN 7 ONLY - NEW July 2016

    https://1drv.ms/u/s!AkcyDjKJJ6KwhjWLAtKVYwU2f8pe

    unzip it onto your drive, so you will have 

    C:\new7x64upd FOLDER. Then run as admin on the 7pebuilder.cmd .


    Note: Works for x86 and x64 win7


  • The Special Win 7 only version makes a more advanced pe. It includes windows explorer, audio, wireless networking.

  • Hi,

    For me there is no difference. When I was with my Windows 7 using.

    To min reallizar worked to restore both do both create in msistema u or another.


  • Thanks for replying, SIW2.  You wrote: 


    "The Special Win 7 only version makes a more advanced pe. It includes windows explorer, audio, wireless networking."


    I tried to load the drivers for my wireless card.  I selected the folder that contains the installation INF and SYS files for mine on Win7 x64.  But while the wireless device was now visible, it could not be enabled.  I think the error message was that it could not be started because it was already running, and the icon indicates the wireless as "turned off" even though it is on.


    I will try again soon to remake a CD.  (I've learned now to use a RW-CD!)


    Michael


  • Sorry for that there is something wrong with recognizing the wireless in the WinPE.

  • @MPPURCELL,


    Did you try running PENETWORK? The icon is on the Taskbar.

  • I'm using windows 10, backed up using system image with Aomei backupper, my system crashed now when I try to recover the backup, I get the message "Invalid file........" I tried booting with your iso disc but got the same message. Got any ideas? Thanks


  • What kind of the backup you do? It is full backup or incremental backup?

Sign In or Register to comment.