Thanks, I downloaded v8. Have you corrected as of now the error vagn_32 and XenonKilla found in the 7PEv8.zip? Do you have documented anywhere the change history of what you have improved?
I am trying to build on a Windows 10 Pro, when it boots I get the following;
A winpeshl.ini file is present, but no commands were successfully launched This could be caused by incorrect formatting or an invalid executable name.....This is my first time building this, if I go into the directory and manually execute backupper.exe it works. From the dos prompt, it looks like everything is there, just no gui to select anything. Thanks in advance.
As a following to the above, does it make a difference that I installed the Aomei software on my partition??? I keep all my non Windows files on a partition. Also, the winpeshl.ini file has the following;
Let's say tomorrow leaves the 3.6 version of Aomei if I use the folder already downloaded files etc .. will of a problem? Erasing vo to create a new iso?
Regarding Post #41,... Sorry, I still don't understand what is the difference running on Win7x64 either of the two versions posted--both seem to state they will run on Win7--as quoted below--is there any advantage in using the Win7 only version? ...(Since both will run on Win7) :
New versions:
If you have any Aomei products installed, they will be included and can be accessed from a menu.
It is easy to use, download this file from dropbox,
New version July 2016 for win 7/8.1/10 x86 and x64
"The Special Win 7 only version makes a more advanced pe. It includes windows explorer, audio, wireless networking."
I tried to load the drivers for my wireless card. I selected the folder that contains the installation INF and SYS files for mine on Win7 x64. But while the wireless device was now visible, it could not be enabled. I think the error message was that it could not be started because it was already running, and the icon indicates the wireless as "turned off" even though it is on.
I will try again soon to remake a CD. (I've learned now to use a RW-CD!)
I'm using windows 10, backed up using system image with Aomei backupper, my system crashed now when I try to recover the backup, I get the message "Invalid file........" I tried booting with your iso disc but got the same message. Got any ideas? Thanks
Comments
ERROR: The system could not find the registry key or value.
Might want to double check line 523
You've got "reg.exe import "BIN\REG32\VC90x86.reg" >nul"
But only a "REG86" folder exists in the BIN folder, not REG32.
Thanks XenonKilla.
Thanks, I downloaded v8. Have you corrected as of now the error vagn_32 and XenonKilla found in the 7PEv8.zip? Do you have documented anywhere the change history of what you have improved?
Hi, have you done any further work on the WinPEmaker for Win 7? Is this in a finished state?
I am trying to build on a Windows 10 Pro, when it boots I get the following;
A winpeshl.ini file is present, but no commands were successfully launched This could be caused by incorrect formatting or an invalid executable name.....This is my first time building this, if I go into the directory and manually execute backupper.exe it works. From the dos prompt, it looks like everything is there, just no gui to select anything. Thanks in advance.
As a following to the above, does it make a difference that I installed the Aomei software on my
partition??? I keep all my non Windows files on a 
partition. Also, the winpeshl.ini file has the following;
[LauchApps]
"pecmd.exe EXEC !winpeutil InitializeNetwork"
Try
[LaunchApps]
pecmd.exe "EXEC !winpeutil InitializeNetwork"
Hello,
awesome solution for me. thanks man keep it up. Acrobat DC crack
SIW2 ,
KeePass has possibility is to integrate?New versions:
If you have any Aomei products installed, they will be included and can be accessed from a menu.
It is easy to use, download this file from dropbox,
New version July 2016 for win 7/8.1/10 x86 and x64
On onedrive
https://1drv.ms/u/s!AkcyDjKJJ6Kwhmlzah9AtJ42xMKh
unzip it onto your drive, so you will have
C:\AomeipeV9 FOLDER. Then run as admin on the Run-me-as-Adminv9.cmd .
******************************************************************************************
Special version for WIN 7 ONLY - NEW July 2016
https://1drv.ms/u/s!AkcyDjKJJ6KwhjWLAtKVYwU2f8pe
unzip it onto your drive, so you will have
C:\new7x64upd FOLDER. Then run as admin on the 7pebuilder.cmd .
Note: Works for x86 and x64 win7
SIW2,
I could not open the Aomei Partition.
New version July 2016 for win 7/8.1/10 x86 and x64
Sorry for that our software cannot support to be used in another WinPE.
You can only create the WinPE witf the software itself.
Previous version was usually by adding
And Aomei PE Builder if someone wants to download a Windows 7 only with SP1 and will work.
It is also valid with Windows updates until the end of 2014
Thanks Vagn. I probably made an error in the script, will have a look.
What language is your Windows installation?
Hi,
PT BR Brazil
It works fine for me.
What do you have in your registry?
Hi,
I did with Windows 10 and it worked, but those cited key not appear or Windows 10 and not Windows 10.
Tell me something I can keep the "aomeipeV9" folder for future constructions of your winpe?
I can't understand your post.
Glad it worked with win10
Let's say tomorrow leaves the 3.6 version of Aomei if I use the folder already downloaded files etc .. will of a problem? Erasing vo to create a new iso?
Yes, it should work with Backupper 3.6
.aomeipev9 should be OK with any installed version of Aomei Backupper.
Regarding Post #41,... Sorry, I still don't understand what is the difference running on Win7x64 either of the two versions posted--both seem to state they will run on Win7--as quoted below--is there any advantage in using the Win7 only version? ...(Since both will run on Win7) :
New versions:
If you have any Aomei products installed, they will be included and can be accessed from a menu.
It is easy to use, download this file from dropbox,
New version July 2016 for win 7/8.1/10 x86 and x64
On onedrive
https://1drv.ms/u/s!AkcyDjKJJ6Kwhmlzah9AtJ42xMKh
unzip it onto your drive, so you will have
C:\AomeipeV9 FOLDER. Then run as admin on the Run-me-as-Adminv9.cmd .
******************************************************************************************
Special version for WIN 7 ONLY - NEW July 2016
https://1drv.ms/u/s!AkcyDjKJJ6KwhjWLAtKVYwU2f8pe
unzip it onto your drive, so you will have
C:\new7x64upd FOLDER. Then run as admin on the 7pebuilder.cmd .
Note: Works for x86 and x64 win7
The Special Win 7 only version makes a more advanced pe. It includes windows explorer, audio, wireless networking.
Hi,
For me there is no difference. When I was with my Windows 7 using.
To min reallizar worked to restore both do both create in msistema u or another.
Thanks for replying, SIW2. You wrote:
"The Special Win 7 only version makes a more advanced pe. It includes windows explorer, audio, wireless networking."
I tried to load the drivers for my wireless card. I selected the folder that contains the installation INF and SYS files for mine on Win7 x64. But while the wireless device was now visible, it could not be enabled. I think the error message was that it could not be started because it was already running, and the icon indicates the wireless as "turned off" even though it is on.
I will try again soon to remake a CD. (I've learned now to use a RW-CD!)
Michael
Sorry for that there is something wrong with recognizing the wireless in the WinPE.
@MPPURCELL,
Did you try running PENETWORK? The icon is on the Taskbar.
I'm using windows 10, backed up using system image with Aomei backupper, my system crashed now when I try to recover the backup, I get the message "Invalid file........" I tried booting with your iso disc but got the same message. Got any ideas? Thanks
What kind of the backup you do? It is full backup or incremental backup?