Extreme slow clone time
Starting at 8pm and finished at 1pm the next day, roughly 16 hour long process to clone a 1TB drive.
AOMEI 7.2.3
Source: 1TB SSD 2.5'
Destination: 2TB SSD 2.5'
Connection: Both using onboard SATA port
All the program that might be read/write the drives are tuned off,
Cloning speed starts at 150MB/s for the first 20 seconds and start dropping after a few minutes,
stays under 15MB/s for the rest of the operation.
Hard copy and paste (Ctrl C & V) was way faster than using AOMEI, between 500~75MB/s depends on files.
Comments
[2023-06-10 19:58:02]