RC44
Comments
-
SIW2 : Understood, thanks for the information.
-
SIW2 : Tried v3. I copied the winpe.wim file made using v2 and placed it below Run-me-as-AdminV3.cmd. When I ran the program, I got the bootable.wim not found message, and had to download the winpe.wim file again. For some reason the copied winp…
-
SIW2 : Tried the new version. I ran it without adding my winpe.wim file to see what would happen. This time your program did download the wim file, and it is the exact same size as the copy I have. I wasn't sure if my copy was a full one, as the …
-
SIW2 : I just noticed the message below. As you said, I'm missing that file.
mkisofs: Uh oh, I cant find the boot image 'BOOT/ETFSBOOT.COM' inside the target tree.
I did as you suggested about the boot.wim file.…
-
SIW2 : I took the folders inside ISO and used ImgBurn to create as iso file. I burned a cd, but it would not boot. I used rufus to use that iso to make a bootable thumb drive, but I only got a blank screen with a blinking bar in the upper left ha…
-
SIW2: Below is the contents of my AOMEIPE folder. The odd thing is that there is now an ISO
folder, 189MB, yet the iso files generated are only 34 KB. I figure I am doing something wrong, or it might just be my system. Either way, I …
-
SIW2: Tried your program, but seems bootable.wim could not be found. I see Recovery
folder in C:, but it appears to be empty. My 8.1 is an upgrade from 8.0, and as I have seen
elsewhere, you can not make a recovery disc with it…
-
SIW2 : That would be appreciated. I have not been able to burn a workable Aomei disc
with either Backupper or PE Builder 1.4.
-
Understood, thanks for your reply.
-
SIW2 : If you get back this way, would like to know if you have a pe builder for 8.1, 32bit.
-
Homer, other than making a disk on my sister's computer, which is a store bought one that I think is also 64 bit, I am not going to spend much time pursuing this issue. It will probably get fixed sometime in the future. I will just keep an eye on…
-
admin: Please see previous post.
-
Homer, I downloaded your iso and burned a disc. As I was scrolling to your post, I saw something I hadn't taken note of before, that you have a 64 bit system. Mine is 32 bit, because I use some rather old programs I would like to keep using, but …
-
Homer, I would appreciate that, please do if you find the time. Thank you.
-
admin, here is the link:https://www.dropbox.com/s/q7z40thh6qvmag9/ampe.iso?dl=0
I think the problem has to do wi…
-
Homer, that is what I will do. My sister has a Win 7 machine and the next time I go to see her I will use it to make the PE boot disc.
I referred to Win 8.1 not being able to make a windows recovery disc in last post, I meant to say Win 8.1…
-
Good to see the issue solved for you, Homer. Although in a roundabout way.
For me , the problem still exists. With Win 8.1, you can't make a recovey disc, so I think that fact may have something to do with the inability for me to generate a…
-
I have 2 computers with the same problem. Both I built myself and fairy simple units.
Main computer: ASROCK 970 EXTREME 3 mb, Vertex 4 128gb ssd, WD 500 gb sata 3,
AMD FX4100 chip, 19" 4/3 monitor
Backup (ol…
-
Another thing I should mention is that when I first used the rescue disc there was a pop up window notifying a newer version was available. Seems the focus was on this smaller window with only 3 buttons, making it even harded to hit a button. I d…
-
Sorry Homer, I should have explained my process more. Once I saw the mouse did work somewhat, I also found just randomly moving the mouse didn't work well. I took a piece of paper, laid it on the desk horizontally, and place my mouse in the lower…
-
I had the same problem with the disc I made using Backupper 2.8 on my Win 8.1 desktop. This was the first time I used a backup program and just thought it would be a good idea to try one now. I made a system backup for my new and older backup com…