Peter13feb
Comments
-
To success your clone you need (with "source" disk disconnected)
bcdboot c:\windows /L en-GB
except you have to find the right drive letter in the WinPE environment, it might be not C:. Given you have three primary partitions an…
-
I also want to make sure here in #24 you complain about Partition Manager, but the original question was about Backupper.
Consider please also a …
-
wait, as exactly this has worked for several years, to exactly this external disk, one has to find out why it does not work anymore.
As a suggestion, before doing the next clone, it would be helpful to initialize the p…
-
regarding #26, on disk 0, there is only one "boot" partition, and it is the 148GB partition. In addition there is a "system" partition of 100MB.
<… -
the diskpart information is understandable.
comments
Partition Assistant did not copy the two partitions that were created and are visible, it says filesystem RAW., it also does not say RESERVED to the 128M…
-
I just tried, on my virtual computer, to create an USB bootable media, and succeeded. The USB stick was bootable. Computer is a Windows 10, EFI firmware, 64 bit.
I noticed one strangeness when creating the bootable media: AOMEI backupper as…
-
Good that it boots now, with your restored Windows 10.
I do have these remarks:
It cannot be bcdboot x:\windows /L en-US. (x: is the drive letter of Windows PE). One has to find the drive letter of your OS partition, as seen in Windo…
-
To answer your questions: windows 7 and windows 10 are the same regarding these issues. On your UEFI motherboard, not laptop, both are installed on GPT disks. I could imagine you did the windows 7 test on a different computer? or simply were more…
-
diskpart
list disk
select disk # (the 250gb)
clean
convert gptexit
exit
you don't need to create a partition (unless AOMEI Backupper is crazy). you can't say active on a gpt disk.
If reboo…
-
at step 2 you need command prompt from the bootable media, for example from the windows setup stick.
at step 5 you need to select your 250GB or 500GB disk, instead of disk 2.
select disk #
after step 6 clean you need…
-
It is a bug that when it needs to restore three partitions in the GPT/UEFI case, it squeezes them into where one partition was.
I suggest you do, for your Windows 7 job, this from Windows bootable media
bcdboot c:\windows /L en…
-
I don't understand what you want. I rewrite what you said:
1) you were successful in creating a bootable USB stick, ticking WinPE.
2) you could not boot from the stick, because it did not boot neither in UEFI mode nor in legacy mode.<…
-
>>Well im out of ideas now.
do the diskpart commands above
do a disk backup from aomei backupper standard 3.2
report the results
>>Well im out of ideas now.
please report how you found …
-
there is no shadow stored somewhere.
Shadow Copy means a frozen state of the file directory and frozen contents, because this freezing is needed for doing backup, on the source side and (for sync) on the destination side. Only when y…
-
please consider in addition the source NAS must be given to AOMEI Backupper in the IP form \\192.168.p.pp\share, not in the name form \\servername\share . From experience.
-
Shadow Copy is a feature of Windows that makes sure a consistent state is processed. That is, it uses a "frozen" state of the files on the source disk and uses a "frozen" state of the files on the destination disk, for its processing. Changes hap…
-
-
I suggest you try to clone from a bootable media (that is not only create bootable media, but then boot into it and run Clone from there). If C:\ is locked by something, then it is locked and we can't know what softwares you run. Usually it is no…
-
Neo hat ausserdem im Blick, dass Backupper das Partitionsschema nicht anpasst, sondern nimmt was es ist. Wenn die source disk ein MBR-Partitionsschema hat, und die destination disk ein GPT-Partitionsschema bereits hat, dann passt es bereits nicht…
-
The label "EFI system" is just a text and one can write whatever. Windows setup does not write this. Please do diskpart. It will tell as type either "primary" (when MBR) or "system" (when UEFI). It will tell as info "system" in either case. It wi…
-
I understand you want to clone the source disk to a destination disk.
As the computer is UEFI, and the source disk is GPT, I am missing the WinRe partition there.
It is very difficult to say what is wrong with your computer.
… -
1) also bei robocopy sind die Dateigrössen von source und ziel die gleichen?
2) also bei IP waren die Dateigrössen von source und ziel die gleichen, oder waren bei IP die Dateigrössen im Ziel wie bei Servername, oder hat es bei IP nichts ko…
-
Du musst vermutlich bcdboot c:\windows /L de-DE machen, damit der Bootvorgang korrekt konfiguriert ist. (command shell, z.B. von bootable media, oder von einer Windows repair disc). Der Laufwerkbuchstabe c: ist eventuell anders, weil bootable med…
-
zumar es wäre interessant zu erfahren, ob sync die Dateien korrekt kopiert hat, oder ob es am Ziel schlicht falsche Dateiinhalte hatte? Die fehlerhaften Grössenangaben würden das eigentlich besagen. Das geht aus deinem Bericht nicht hervor..
Es gibt überhaupt keinen Sinn, dass die Dateien eine andere Grösse haben. Da wird irgendetwas fantasievolles von der Source gelesen... Ist es möglich, die Replikation der Sicherung von Hand zu machen?
In my opinion it reads just anyth…
Wie gross sind die Originaldaten des Sync? Das zweite Bild ist ja auch eine Sicherung, gemäss Bild, links oben. Es passt nichts zusammen (ausser die Dateinamen).
Zudem sehe ich im Sync-Bild einen doppelten Ordnernamen, ein VMDK ist zuviel (…
The issue with eMMC has been here before, but was always reported as that one cannot select the source.
Dell Venue 8 Pro has 32GB eMMC. eMMC memory is known not be supported by AOMEI.
eMMC is different from SSD and rotating hard disk,…
It does not back up temporary files, page file, downloads from windows update, hibernate file, system restore points, trash. Temporaries and system restore points could be that large to make a difference.
I suggest compression anyway, a lar…