Very long AOMEI Backupper startup times
I'm running Backupper v7.2.0 and Windows 11. It takes an inordinately long time to start, usually at least 45 seconds to 1 minute after clicking its icon. I have it set to backup on a weekly schedule and that seems to function normally but clearly something isn't right as nothing else takes such a long time to start. Any suggestions on how to fix this issue? I've tried uninstalling/reinstalling with no change in startup times. Thanks.
Comments
Could you disconnect the internet and then start AOMEI Backupper to check again?
"I've been using the program for a few months on this computer"---Is there no problem on the old edition?
Please uninstall AOMEI Backupper, and reboot the computer, and reinstall AOMEI Backupper. And then, please run AOMEI Backupper to check again. In addition, please close other running program when you start AOMEI Backupper.
So it isn't the OS per se since either inside a VM load up AOEMI quickly. But the bare metal Win10-x64 OS drags its feet. Any thoughts?
The startup loads ~43 megs, then slowly over the 20+ seconds increases its storage in small amounts. Towards the end of the 20+ seconds, the storage grows quickly in larger chunks to end up at ~93 megs.
When I switched off Windows Real-time protection (Antimalware service) all went back to normal.
I'm using Standard 7.2.1