Error Code 214 with backupper while restoring

deerczl · November 2018

i meet the error code 214 while restoring my system partition, it shows that my dirve have no enough space but it seems have. Pic show that the souce only need about 80,but there is about 200 GB unallocate. i dont know what i did wrong,and hope you can help. thx!
PS:i use the AOMEI PE BUILDER to make a pe usb drive and run the backupper in it.
thank you for your answer.
Deer

deerczl · November 2018

ummm i use the "check image" in utility, and it shows failed to read the file. SAD

But thanks

deerczl · November 2018

WWWWHAT? I check it once more and it complete succefully.

deerczl · November 2018

AND restore failed again

admin · November 2018

What's the size of your backup image?

deerczl · November 2018

Aobut 55GB.
BUT i found that Pic. 3 shows the source partition was over 900GB. May be the wrong here?

deerczl · November 2018

It seems not. I make a system-backup for a 90G partition, but fail to restore too.The same information code 214.SAD

admin · November 2018

Are you using the latest version of Backupper?

deerczl · November 2018

The version in AOMEI PE is 4.0.6.

admin · November 2018

Please try version 4.6.0.

deerczl · November 2018

Sorry, i canot find the 4.6.0, it shows that the 4.5.6 is the lastest one. Could you send me a website to download 4.6.0?
And i wonder it depends on the version while backuping or restoring.

RusUser · November 2018

@Deerczl

"Sorry, i canot find the 4.6.0, it shows that the 4.5.6 is the lastest one. Could you send me a website to download 4.6.0?"

Choose any of the three links below and download now version 4.6.0 everywhere
https://www.aomeitech.com/aomei-backupper.html

deerczl · November 2018

well, i find it today. But i wonder if i should backup again? It suggest me to restore in PE. But the version in PE just 4.0.6. Does it matter?

admin · November 2018

Maybe you could create a PE manually with 4.6.0.

deerczl · November 2018

I did it, but failed, the same backupfile, the same code. Whatever, thanks for your answers.

RusUser · November 2018

Or you can not boot from the boot disk, and allow the program (by setting the recovery from under Windows) to restart the computer in PE mode and try to recover from there. Hardly already of course. But suddenly.

Error Code 214 with backupper while restoring

Comments