error while loading

rezist

I'll tell you my story, how Windows10 stopped loading.

I wanted to split an existing disk into 2

there was 180 GB of free space.

by means of windows10 at first I was allowed for a new disk 2GB

I turned off the protection and began to allow 7GB

I wanted a disk for installing an android on it for about 50GB

then somehow he disconnected something and got to 15GB by means of Windows10, this was certainly not enough.

climbed further behind programs that share the disk

first  did not like MiniTool Partition Wizard

then another

AOMEI Partition Assistant on it and stopped like cut off a piece of 50 or 60 GB

then I rebooted and that's it, I suffer for 3 days I can not load Windows10

gives out a blue screen with the inscription

Recovery

Your PC / Device needs to be repaired

An unexpected error has occurred

Error code: 0xc000007b

I ask for help or advice where to dig further, what to punch?

admin

Hello Rezist, 
Did you run AOMEI Partition Assistant under windows to split C: drive? 
Could you create a WinPE bootable media of AOMEI Partition Assistant on another working computer, and then boot this computer from WinPE to check the system disk? Please take a photo so that we can help you check.
As for creating WinPE, please refer to here: https://www.diskpart.com/help/make-bootable-cd-wizard.html

rezist

I already have a WinPE on a USB flash drive, but what does it mean to check the system disk
chkdsk C: /f /r /x in Command Prompt its ok?
stage 4 need wait 5 h 40 m

rezist

its ready 

yh2827

This may help ...

"How To Fix Error 0xc000007b in Windows 10"

admin

@ What tool did you use to create the WinPE Bootable USB?
And, Have you fixed the problem now via chkdsk?

rezist

I used another computer with a normally working Win10,
 on the Internet, created a USB flash drive from it 
and booted.The problem is not solved

admin

@Rezist, Did you mean that the WinPE bootable media still can't boot? What error or situation did you get?

rezist

winpe boots fine, there are no problems with it. the error, as before, when booting from the hard disk, as it was, it remained, nothing has changed

admin

@Rezist, What operations did you perform via AOMEI Partition Assistant? Or, what features did you use? Could you give us a detailed description of your steps?