Cloned hdd cannot boot

Hello, I have a partially damaged hdd. It starts regularly and works for some minutes then it slows and finally hangs.
Some sectors are damaged.

I've not been able to clone it directly, so I have disconnected HDD from original PC and connected to a working PC, performed a checkdsk, then connected a third new HDD.
After all this I performed cloning from disk2 to disk3.
Everything worked fine and all partitions have been cloned, but new disk does not boot.

The error is:
Your PC/device needs to be repaired
A required device isn't connected or can't be accessed
eror code: 0xc000000e


I'm working under Windows 10, using Aomei Partition assistant pro 6.6



Sign In or Register to comment.