Home› AOMEI Products Support

Aomei Partition Assistant Pro no UEFI boot

matrixmatrix
in AOMEI Products Support
i just updated the new version, and the boot Stick does not start in UEFI mode.

Tagged:

Comments

  • aiArtisanaiArtisan
    You just updated the version of what? The PA application, or the version of your USB stick?
    Please check that you are creating the 64xUEFI version of PA, not the 32xBIOS version. Please check that your motherboard is running in the same UEFI mode that you normally run in, either UEFI-csm, or UEFI-noncsm.
  • adminadmin
    @Matrix, The WinPE of AOMEI Partition Assistant can support UEFI mode. What boot error did you get? And, could you boot the same WinPE stick under Legacy mode？
  • matrixmatrix
    It just does not start, and i didn't downloaded PE
  • matrixmatrix
    "You just updated the version of what? The PA application, or the version of your USB stick?
    Please check that you are creating the 64xUEFI version of PA, not the 32xBIOS version. Please check that your motherboard is running in the same UEFI mode that you normally run in, either UEFI-csm, or UEFI-noncsm."

    Tools -> Bootmedium --> ISO, does not boot in Uefi
    Does not ask, Computer is UEFI
  • matrixmatrix
    Tried USB also, does not boot.
  • aiArtisanaiArtisan
    edited July 2023
    Matrix, I understand your PC is in UEFI mode. There are 2 different UEFI modes: UEFI-noncsm, and UEFI-csm.
    1) Which one of those 2 UEFI modes does it say it is in? If you cannot find any information on that, it is probably in UEFI-noncsm mode.
    2) What year is the motherboard?
    3) What program are you using to create the USB stick?
    Partition Assistant WinPE USB:
    Add custom drivers, such as NVMe, if necessary.
    https://www.diskpart.com/help/make-bootable-cd-wizard.html
    Aomei WinPE Builder 2.0 USB, includes: Partition Assistant, Backupper, Recuva, OSF Mount, CPU-Z, Bootice. Does not support some internal NVMe disks, or other additional drivers.
    https://www.ubackup.com/articles/make-a-bootable-usb-1004.html
    https://www.ubackup.com/pe-builder.html
    Free tools not from Aomei:
    Hirens Boot PE - live USB tool suite
    160 utilities, old BU 6.5.1, PA 9.2.1. To add custom drivers, such as NVMe, simply put them into the “CustomDrivers” folder. Hirens is not recommended in combination with Ventoy USB.
    Ventoy - bootable USB Creator
    https://www.ventoy.net/en/index.html

  • matrixmatrix
    I get it, it does not boot with Secure Boot
  • aiArtisanaiArtisan
    edited July 2023
    If you create a Ventoy USB stick, and put Aomei ISO into it, you can boot in most PCs with Secure Boot on, but not all PCs. I have done it 100x.
    Ventoy - bootable USB Creator
    https://www.ventoy.net/en/index.html




Sign In or Register to comment.