Cannot log back into Windows after using bootable media.
I cannot get this software to work, every step has been a new obstacle.
I created bootable media for my reference machine.
Did sysprep
Used bootable media to create my system backup.
Once, I exit from this environment the Windows install is bricked???
I created bootable media for my reference machine.
Did sysprep
Used bootable media to create my system backup.
Once, I exit from this environment the Windows install is bricked???
Comments
See below- had this happen 3 times. Cannot repair
What system did you backup and restore? Did you also do the restore via WinPE bootable media?
And, did you restore it to the original location? or a new disk?
Here are on my steps on my well configured machine:
1. Create bootable USB with Backupper.
2.Remove SID on this machine .
3.Boot this same PC with the USB.
4.Create a system backup to my network share.
no problems here, but now when I exit the AOMEI backupper enviroment, this PC ( the reference machine that I did the above steps on) does not boot.
Haven't even got to the deployment stage.
System backup doesn't affect the system. Maybe the "Sysprep" command resets the system and causes the boot problem.
As per the instructions. sysprep.exe>generalize>shutdown.
That first SS I posted is what I see after making the backup and trying for the system (reference) and just wanting to boot this machine normally?
Maybe you can boot into WinPE, and then do a system restore.