Search
-
Re: PE Builder Desktop/System Font
Thanks for the reply, but I'm trying to set the font for the whole PE environment. Once you boot into the PE environment, ALL the text is in italics. Even in the online help page, you can see a desktop screen shot and the font is italics. https://www.aomeitech.com/pebuilder/help/index.html Scroll down until after step #8.… -
Re: Backup C: partition then restore to F: partition causes screen flicker when booting to F:
I did not restore from the Linux CD, but from within the live system. I did backup and I did restore from the live system. My backup was to a NAS. The virtual disk is SCSI, not SATA or IDE in my case. I shall test restore with the Linux CD. I shall use the virtual disk as SATA. In my opinion a virtual computer is as good… -
Re: Cannot clone disk or partitions again - The partition table on the disk was updated fail
This screenshot is the same as before #8, and nowhere are two boot partitions. The only thing missing still is the recovery partition, that is created on a genuine install. The source disk survived this thread fortunately. I asked #42 last sentence: how the computer performs in daily production, whether it is in use at all… -
Re: Cannot clone disk or partitions again - The partition table on the disk was updated fail
>>>By the way, i do not understand how to execute your suggested command "bcdboot c:\windows /L en-GB" It is the same as diskpart, from the bootable media, from command prompt. If you disconnect the source disk and have only the destination disk connected internally, after a successful clone, see your #32 first paragraph,… -
Re: Cannot clone disk or partitions again - The partition table on the disk was updated fail
mickey you do not use AOMEI Partition Assistant! In #0 you wrote that you use Backupper for doing the clone, and again twice in #8. You cannot get the locked-message, which is from Partition Assistant. Seriously I asked about Backupper for this disk clone, in #10., but with no answer received. Neo gave a picture in #1,… -
Re: Cannot clone disk or partitions again - The partition table on the disk was updated fail
-
Re: PE Builder does not see USB
How to create a bootable stick the easy way: Format the stick as FAT32 (default). Create an ISO in PEBuilder. Mount the ISO (I'm not sure if it exists in Windows 7, please try with a right click), this makes a virtual CDROM. Copy the ISO contents to the stick. Boot into the stick to verify. . I just verified that this… -
Re: Help need with backup test
It would be helpful to verify by #8 the size of C:\Windows\system32\config\system , which is an invisible and protected system file. On my plain Windows XP it is 2.75MB. C:\Windows\repair\system is 1.19MB. And you can compare the two or three ntldr yourself, besides if ntldr is corrupt then loader Error 3 could not appear… -
Re: Help need with backup test
As far as SATA PORT is concern, there is no restriction on the port but on the whole build of the system. You can put more than 500 Gb on the SATA port but due to the design of the system board, it can cause an issue. There are other optiplex system which can handle more than 500 Gb and if these is the need of the user,… -
Re: Help need with backup test
Post #11 was simultaneous with my #12 (earlier it was basic disk). I never needed diskpart in XP because PartitionMagic and other tools were available (no one ever mentioned diskpart). I suggest that you verify the limit given in #8, the registry entry is mentioned there. All these questions about Loader Error 3 in the…