SIW2
Comments
-
It won't matter to you, but the dell touchpad isn't working in the 1904fixed.iso.
I have now got it to appear in control panel, but I am not certain it works because I dont have a suitable machine to test it on.
in WIN10 PE bootable disk won't see main computer HD Comment by SIW2 February 2021 -
That is because you are on the Home screen.
Click Restore in the Left pane as in this photo
in WIN10 PE bootable disk won't see main computer HD Comment by SIW2 February 2021 -
"when I test click "restore" it claims that it can find no image to restore from".
You can browse to the image you want to restore. I always do this with any of these kind of programs.
in WIN10 PE bootable disk won't see main computer HD Comment by SIW2 February 2021 -
-
My mistake. I have fixed it now. Will upload new iso.
-
Did you mange to fix the bcd recovery sequence using reagentc commands ?
If you can get aomei to use the winre.wim, it should work fine. But the recovery sequence needs to be set up properly, which reagentc is supposed to do..
-
You might be able to fix it. From an administrator comand prompt, type:
reagentc /disable
then press enter
reagentc /enable
than press enter
-
If the pebuilder says your current system supports creating the bootable media - do not tick the box to download.
Just click Next. Then you shouldn't need to add drivers.
in WIN10 PE bootable disk won't see main computer HD Comment by SIW2 February 2021 -
It is better to create bootable usb stick for 190A.iso. Because some of the programs are not in the wim and should run off a usb stick.
You can use usb7ice to create bootable usb from iso file . The default seetings are fine. Just point i… -
You can give this a try. It is named 190A.iso
edit fixed: 1904FIXED.iso
https://1drv.ms/u/s!AkcyDjKJJ6KwiF… -
You can borrow mine. I will upload it and link it when done.
I am not sure why you are having that issue. Did you let the pebuilder use winre - or did you download the winpe ?
The winre.wim file you already have as part of your… -
inf files contain the info about the registry entries that need to be created and which other files need to be included, so they are copied to the correct places. Not unusual for a pebuilder only to ask for the inf location.
Yes, it does … -
Try exporting the storage controllers and ide-atapi with dism++.
Then add them with the aomei pebuider.
-
Which of these should I add to the WINPE builder disk?All of them.The official dell media for your machine has a lot of drivers included in the bootable wim files.Storage…You can resize the partition afterwards using windows disk management or aomei partition assistant.In the left pane of dism++ click DRIVERS. Then tick Storage controllers and tick IDE Atapi Controllers.
Click Export to export the drivers from your running system into a folder.
in WIN10 PE bootable disk won't see main computer HD Comment by SIW2 February 2021You can type this at command prompt:Wpeutil SetKeyboardLayout 0407:00000407Or you can add this to windows\system32\pecmd.iniEXEC Wpeutil SetKeyboardLayout 0407:00000407Is this relevant?You cannot have the backup image on that USB. It has to be on some other media.I can. if you are unable to do it, there is something wrong at your end.
"Thanks admin, but then how to run the software ? "If you want aomei pe and the saved backup image on the same flash drive:1) Create bootable flash using aomeiThe links are here:You can extract the raid driver from your current installed windows, then add it to the boot media.Exporting your currently installed raid driver is easy with Dism++ tool in Target Disk Not Recognized Comment by SIW2 July 2018if you are using windows 7, pebuilder doesn't work on an system with updates.You can downoad the file insteadYou can use something else to create a bootable usb.There is an iso file here:Can you see the sdxc card from winpe?
open cmd prompt, type notepad, when notepad pops up, click File>Save and browse to see the drives.
Hi alfred46
Backupper does not change anything. Your vss error is not related to Backupper.
"Is there a link to download it?"
Can you not download it from the backupper pe window?
You can use Aomei partition Assistant to convert the target disk to gpt.
In Partititon Assistant main window, rt click the target disk and the context menu will list "convert to GPT disk". Select that, and then click the green …