MENINBLK
Comments
-
Thank you for the product license !
-
Today I downloaded AOMEI Backupper TechPlus v4.6.2 and upgraded my installations.
I am happy to report that my fastest workstation completed it backup at the following speeds !!!
OS Drive - Kingston SKC400S37 512GB SATA SSD @ 600+mb/s.
After trying this on 4 of the 11 workstations, I am convinced that running the Standard Version is the Best.
After trying the backup with the Standard Version and getting over 600mb/s backup speed from a SATA SSD drive,
I can simply enter …Just a shot in the dark... Do both computers have Windows Credentials set to Enterprise Class for each other ?
PeterI noticed something tonight when backing up one of the 11 workstations I do every two weeks. I was using BackUpper Standard Version 4.6.1. When the backup finished, you get a link at the bottom of the task window saying the backup has completed and …Double check the SHARING settings on the destination computer.
Sometimes if the share is not set to give complete control over read and write,
you cannot access the shared folder properly to write a new file.
PeterI have been having problems with v4.5.1 and v4.5.2.
Try installing v4.1.0 over the v4.5.1 you have installed.
When it asks to leave the licensing information untouched for future installations answer YES.
COLD BOOT the computer after …Over the weekend, I was backing up my client's computers and two computers running Backupper Standard v4.5.1 had the same error 33. I uninstalled v4.5.1 and installed Standard v4.1.0 and the backup completed successfully across their network.
S…The Backup completed successfully using Backupper Standard v4.1.0.
Peter...I have been working with the AOMEI crew as a Beta Tester on their Backupper product line.
Your Tech Support is good. At least you respond to emails within 24 hours.
Your products are a bit slow, they need to run faster and you need to rele…After downgrading to AOMEI Backupper Server v4.1.0 my license was invalidated so I could no longer use Server.
I ended up uninstalling Server and installing Backupper Standard v4.1.0.
I first did a FULL BACKUP of my System OS drive, and I …I tested BOTH drives with HD TUNE PRO v5.70 and nothing was found wrong with either the SOURCE or TARGET drives.
I am downgrading my installation to AOMEI Backupper Server v4.1.0 and I am going to try that.
Peter...Hello,
I am using AOMEI Backupper Server v4.5.2 on my personal computer.
This is a Windows 10 PRO x64 system on an Intel Core i7 5960X
on an ASUS RAMPAGE V EDITION 10 motherboard with 32GB of G.SKILL RAM.
The motherboard is runni…Okay, I have everything setup on my network.
I go to the server and startup AOMEI Backupper Network Beta and out of 12 workstations I can only see THREE ??? In Windows Explorer I can see all 12. What gives ? Is there a way to force Backu…
Hello admin,
Thank you for the update.
We just received the new Panasonic FZ-Q2.
Once I have things setup here, I will take an initial backup and then report back to you.
Thank you for all your help !!
…
The Office I am managing has now grown from 12 workstations to 14 workstations and one Lenovo notebook.
Soon we will be adding a Panasonic Toughpad FZ-Q2G150AVM.
The Toughpad will be running Windows 10 Pro.
The Toughpad will als…
@MENINBLK
Hi there, thanks for all the suggestions!
You mentioned "Push application updates to workstations after backup is complete" and what applications di…I am managing an office with 12 workstations running Win 10 Pro X64.
Our Server is running Server 2008 R2.
I am using AOMEI Backupper PRO & SERVER to keep an offsite hard drive with the backup images.
Once a quarter I do Ful…