buckitall
Comments
-
Sounds too easy...I can't get Partition Assistant to boot UEFI. I only have MBR systems laying around and one GPT laptop that no longer boots...
I've used Diskpart to delete partitions, try and reimage...fail
I've tried W8.1 x64 insta…
-
How were you able to remove all the partitions?
Diskpart?
-
Deployment feature
-
Try running command prompt as admin with the following commands...
sfc /scannow
chkdisk c: /r
-
Hi Homer,
I believe SIW2 is refering to WindowsPE instead of RE, and I thing Admin is asking if you use PS/2 instead of telling you to use PS/2.
Have you tried to manually add the drivers as the Admin refered to?
…
-
Hi Datenol,
1st make sure you are using Backupper v2.5 to create WindowsPE
If you use the PE builder it will only reconize v2.2 (update to come soon).
-
It is best to create PEbuild on a 32 bit system, this way you can add additional software.
I have had success creating UEFI by using RUFUS to format the thumb drive then open the .iso and drag to the usb afterwards
-
I think I've figured out what's happening,
When the partition map changes it no longer restores such as picture three in previous post. I wish it would just reconize the drive letters and restore to those partitions instead of recreating n…
-
Thanks YC,
I get that it restores to one partition and creates three...This increases the number of parititons overall. This is the same machine and from the restore of W8.1 you can see there are already 3 partitions to restore. When selec…
-
This should not happen if it is all to and from one computer.
Selected W8.1x64 Restore
…
-
Found my problem to be with only one system, it worked on others.
-
I am also having trouble with the bootimage iso. I've tried both USB and CD boot options and both hang at the startup screen "AOMEI Backupper"...loading.
-
Error Code: 220
Error description:
The feature on the NTFS can not be supported by the program yet.
The metadata of NTFS partition contains the feature which cannot be supported by Partition Assist…
-
To enter safe-mode for windows 8...
-
1st thought is to try cmd prompt with SFC /scannow.
Are you creating an image to your backup partition? if that's the…
-
Good to hear, thanks for the update
-
Find you log files under the following:
C:/Program files x(86)/AOMEI Backupper/log
-
You can use AOMEI Partition Assistant to "rebuild MBR".
It looks like you have two disk with Windows O/S on it, have you tried to physically disconnect one at a time?
-
Hi thenndral,
Sorry about the delay, could you please post the "log files"?
You can find them under the C:Program files (x86)/AOMEI OneKey Recovery 1.1/log
-
Hi Joel60,
Would it be too much trouble to collect some screen shots? This might clear up some confusion as to where you are having difficulty. Use your snipping tool found under ->all programs ->accessories.
-
Hi, mickeyb44
Did you run the clone process while under Windows?
"If AOMEI Backupper has been employed under the Windows operating system, the system disk can only be set as the source disk, but can not be set as the destination disk…
-
Hi IanCPurdie,
I also cannot find this feature, my guess is that the incremental or differental backups require your 1st backup to be in the same location for reference.
You can move your 1st backup image to a new destination and sch…
-
Hi Plockerman,
Find your "log" files...
C:\program files (86)\aomei backupper (version)\log
and .zip them up and post here please in The file in an image file can not be mounted or explored Comment by buckitall January 2015
-
-
Hi X4mple,
Are you trying to restore files to a fresh install version of Windows?
Or trying to restore to the formatted disk?
Are you restoring from backups created on a CD, or external HDD?
There should be a…
-
It should not, but as always create a backup for just in case situations that it may fail.
-
Hi Amit,
Try to reboot into pre OS with AOMEI P/A then as YoungCheng suggested, try these solutions...
Solutions:
1. In case of an offline or read-only status disk or volume, the modification of pa…
-
Hi vagn,
You state the backup restores just fine. I'm guessing you are recieving this error due to you using YUMI and the error states "does not match with the current software version" might be due to looking into the wrong location on yo…
-
Hi Gockel,
If you are just looking for an .iso, then I would suggest using AOMEI PE Builder
This will give you the tools to create what you a…
-
I find that sometimes the "system restore" has difficulty finding the boot loader...If you click on "System Restore" and follow up with "No" instead of "Yes" to restoring the system you can just restore the main partition...normally "C:" drive. Y…