Home AOMEI Products Support

Aomei backer upper not working again

Seems to be a recurring theme - it works for a while then it stops. 

Here's the latest error message: 
Backup is initializing...
Checking volumes...
Backing up the information of storage device...
Backing up of the volume 0...
Backing up data...
Backing up of the volume 0 done.
Backing up of the volume 1 (C:)...
Backing up data...
Information Code:33
Failed to read sectors. It may be because the backup source has a bad sector or the backup source is missing.


--


I did a chkdsk on the target and no bad sectors.  I also then formatted it just in case.  And this happened again.  I wish I knew why this seems to come back all the time.


I also did a sfc /scannow on C and it found no errors.


Any ideas?


Comments

  • Also did chkdsk on C drive - ran it again - ERROR!!
  • Anybody have a clue on how to fix this?
  • Sooo...here goes.  I ran Tron, which debloats and removes malware, etc.  And, now I can do backups - started a fresh full backup.
  • @Spodeworld, Could you send us log folder under the installation directory of AOMEI Backupper so that we check and analyze the problem further?
  • edited June 2021
    Hi - @adminhere's the last batch of them.  the one I'm concerned about is backing up the C drive.  The log for jun 13 is the  data drive (D) - which seems to back up OK (but not always).  The C failed regularly over the past few weeks until I ran Tron 2 days ago.  

    Thanks
  • @Spodeworld, You need to send us all files under log folder.
  • @admin - hi...zipped up 128 files.  Thanks


  • @Spodeworld, Thanks for your information. We will check and optimize the error further.
    If you get the error code 33 again, please send us the latest ABCore.txt file.
  • Thank you.
  • I know that this is an old thread so sorry if I'm necromancing but this is the exact same problem I am experiencing.  Has a reason and/or a solution been discovered yet?
  • @Ray Did you get the error when running a backup or clone?
  • Sorry for the delay in responding.  I never got an email notification but to answer your question, I was running a clone.
  • @Ray Please restart VSS in Task Manager and clone again to see if it works.
  • You have a BAD HARD DRIVE ... AOMEI will not FIX bad source drive. You need to do BARE METAL restore to NEW HARD DRIVE from previous AOMEI backup and copy over changed data files. CLONE will not work if source HARD DRIVE have issues. I had similar problem with a client and had to use some other tools to fix source then PRAYED and I was able to clone the drive ... But it all depends on the extent of the damaged drive. 
Sign In or Register to comment.