Home AOMEI Products Support

Windows OS Boot Problem after migration to SSD

edited January 2014 in AOMEI Products Support

Hello,

We have purchased AOMEI Partition Assistant Unlimited Edition license and
installed it on Windows Server 2008. We tried to migrate Operating System to new
SSD of size 250 GB using methods below -

 

1)    Migrate OS to new SSD or HDD Wizard – Completed successfully.

2)    Disk Copy Wizard – Completed successfully.

 

When we started server with new SSD drive (by connecting to the same old
HDD connector of Motherboard) it stuck with error message attached. We tried to
repair operating system using following commands. (Here X Drive is Windows
Server 2008 Bootable DVD Disc Drive)

 

1)    X:\sources\bootrec /fixmbr     -    Command run successfully

2)    X:\sources\bootrec /fixboot    -    Can’t open the drive or
unknown

3)    X:\sources\bootrec /rebuildrec   -    Can’t open the drive or
unknown

4)    X:\sources\bootrec /scanos    -    Detects Operating System on J
drive

5)    X:\sources\chkdsk /r J:      -  The type of file system is UDF.
Windows can't run disk checking on this volume because  it is write
protected.

 

We have had AOMEI software evaluation on another server with operating
system Windows Server 2008 R2 and successfully Tested migration to this new SSD
of size 250 GB. So this new SSD don’t have any hardware disk problem.

 

We would appreciate your help here to resolve said issue.


We have contacted on your support email id. No response since last week.!!!

 

Thanks and Regards,

IT Support

image2014-01-11 12.37.00.jpg


Comments

  • Hello jjury,


    Welcome to our forum. As for your query, actually, we received your email and replied to you, but it seems that you have not received our reply. As for your problem, we suggest you first give us the BCD file as well as the log file of our program, so that we
    can analyze the problem for you in an efficient way. You can put these file in a zip file and then attached it here. For BCD file, please go to System Reserved partition and then locate the BCD file. The log of AOMEI Partition Assistant are located in the installation directory of this program.


    Best Regards,

    AOMEI Support Team

  • Hello,


    Herewith  we are sending AOMEI_Error.zip file contains BCD and AOMEI log files. Requesting you to review and provide us solution asap.


    Thanks and Regards,

    IT Support

    imageAOMEI_Error.zip


  • Hello,


    This problem is a little bit tricky, we suppose it is caused by your particular circumstance. In order to solve this problem in the fastest way possible, we suggest you allow us to offer remote assistance. Our technicians will do their best to help you on this issue. How do you like that? Besides, if you have Skype account or Gmail or Hotmail, we can contact with each other efficiently.


    Best Regards,

    AOMEI Support Team

  • Hello,


    Sure we can have a conference meeting. You can email us your contact information and Geographic location on [email protected]


    Thanks and Regards,

    IT Support

  • Hello,


    I've sent you an email, please check your inbox.


    Best Regards,

    AOMEI Support Team

Sign In or Register to comment.