AOMEI recovery environment
Hi admin, my system is:
AOMEI Backupper Pro product, ver. 6.5.0 Loaded AOMEI Recovery Environment;
OS Window 10 Pro x64 bits ver. 20H2 Build 19042 with UEFI/GPT File System;
DELL Minitower XPS 8930 Machine, w/Killer E2400 Gigabit Ethernet Controller Wired Adapter;
===========================================================
The recovery environment on restart is properly mounted, but it does not allow me to access the network NAS, on which I successfully backed up the system image, properly verified.
The NAS from AOMEI Backupper is correctly seen as 192,168.###.### (WD NAS ShareSpace) as well as by the operating system, while this is not the case with the recovery environment where I enter the address above that is not recognized by it, giving these errors:
1) - In "Restore/Add Share or NAS Device", after entering the NAS network address, username and Password, the recovery environment responds: "Failed to access the network path, please check if ...
2) - In "IP Set", after entering the NAS address, the recovery environment responds: "Invalid networking path or sharing service has been disabled" (???).
I need help testing the backup procedure, also because the disk (CD/DVD) AOMEI Win PE/UEFI, downloading the recovery environment from the internet, that I created to restore my computer routed me directly to "Create backup now" but with the screen size enlarged, sending out the "Menus" of the recovery environment and thus having become unusable.
===========================================================
Thank you in advance for your help,
Vittorio
===========================================================
Thank you in advance for your help,
Vittorio
Tagged:
Comments
Hi SiW2,
A) - As soon as you entered the 1904v2.iso recovery, the internet connection was present:
As for adding drivers, please refer to here: https://www.aomeitech.com/kb/backupper/winpe-bootable-media-cannot-recognize-some-devices.html
We will optimzie the problem after.
If you still can't connect to your network under WinPE, you might need to copy the image file to an external drive so that you can restore it.