Home› AOMEI Products Support

Cloning a Serial HD to a SSD

BludrivebitBludrivebit
in AOMEI Products Support
My main boot drive on a desktop failed to start up with a SMART failure notification.  I removed the drive and put it on another desktop system that contained the AOMEI backupper Professional program and tried to disk clone the drive to a 500 GB SSD drive.  The data was readable on the old drive.  It is a 600gb drive.

The SSD drive was blank but allocated.  I started the cloning process and it went thru the checking and then moving data up to about 85% of completing the moving (65gb of 70gb).  The overall progress was 32%.  The program froze at that point with no error message or recovery.  I have canceled 3 times and restarted to get the same result.  
Tagged:

Comments

  • JohnnyboyGoJohnnyboyGo
    So still a HDD failure. Not all the data was readable after all.
    Before throwing that away, you can look at some Youtube videos on HDD repair. Good luck.
Sign In or Register to comment.