Main Threads:Does Backupper support PCI RAID Cards ?
  • I store my backups on an external enclosure connected to an add-on card.  Backupper does not see the disk when I boot from the WinPE USB Flash that I created.

    I tried adding the drivers although I do know for sure that they are not needed.  The enclosure takes 4 drives (using port replication) but the one in slot #1 is visible by the PC without drivers.  I can actually see my drive in the BIOS.  I tried connecting the drive to sata port on the MB and then it worked, Backupper saw it so I know it's not an issue with the drive.

    So the question is.  If my BIOS sees the disk although it's connected to a RAID Card, shouldn't Backupper also see it when I boot from the WinPE USB flash drive ?



    Hardware/Software specs.
    Windows 8.1 Pro
    Enclosure is a Rosewill RSV-X4-X.  http://www.rosewill.com/products/1503/ProductDetail_Overview.htm

    The tha comes with it is the RC-211, it uses a si3132 chip. http://www.rosewill.com/products/462/ProductDetail_Overview.htm


Start a New Discussion

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!